Download MT65xx USB VCOM Driver Latest 2022: Step-by-Step Installation Guide

Hello friends! We are here with the article about how to install MT65XX USB VCOM Driver on Windows. If your MediaTek MT65xx chipset-powered device is not connecting with the computer, then this article will help you. You can also download the VCOM driver for Windows 10, 8.1, 8, 7, Vista, and 11 as well in this article. So, let’s get started.

What is the MT65xx USB VCOM driver?

MT65XX USB VCOM Driver is a common USB driver to connect the Android devices powered by MediaTek with the computer properly over a USB connection. With this driver, the computer can recognize the device even if the device is in a boot loop. Also, for flashing stock firmware, rooting the device, and transferring files between the device and the computer, this driver is required.

If you are unable to connect the device with the computer, then that means the installed driver on your computer is outdated or corrupted. In that case, you will need to install the latest version of the MT65xx Preloader Driver. Once you installed it, you can flash the MediaTek MT65xx chipset-powered devices using the SP Flash Tool, install Custom ROMs, Flash IMEI numbers, etc.

Download MT65xx USB VCOM Driver for Windows

In this section, you can download MT65XX USB VCOM Driver. We have shared its latest version. It is compatible with Windows 11, 10, 8.1, 8, 7, Vista, and XP. Also, it supports all smartphones powered by MediaTek MT65xx.  Just click on the download button shown below.

If you are looking for Samsung USB drivers, you can check this post – Download Samsung USB Drivers.

How to Install MT65xx USB VCOM Driver

On Windows 8 and above, you can’t install the drivers which are not digitally signed for security reasons. And unfortunately, MT65xx USB VCOM Driver is a non-digitally signed driver. So, you can’t install it until you disable the digital driver signature enforcement on Windows. In the following sections, I’m going to share all the steps one by one with their screenshots so that you will not have any trouble following them. Following the steps, you can easily disable digital driver signature enforcement and install the MT65xx USB VCOM driver on Windows 10, 8.1, 8, and 11 as well.

Step 1: Disable Digital Driver Signature Enforcement on Windows

First of all, you will need to disable the digital driver signature enforcement on your computer if it has Windows 8 and above. To disable it, you can use any of the methods mentioned below.

Method 1: Disable Digital Driver Signature Enforcement using Command Prompt

• First of all, you will need to run the Command Prompt as Adminitrator. To do that, open Start menu and type CMD or Command Prompt in the search bar. 
• It will show the Command Prompt in the search results.
• Right-click on the Command Prompt and then click on the “Run as Administrator” option. It will launch the Command Prompt as Administrator as shown in the image below.

• After that, type the command written below in the Command Prompt window:
• Bcdedit /set testsigning on

• After writing the command, press the Enter button. It will disable the Digital Driver Signature Verification. 

Method 2: Disable Digital Driver Signature Verification using Advanced Startup Options

If the above method does not work on your computer due to some reason like secure boot privacy protection, then you can use this method. In this method, you will have to restart your computer with Advanced Startup options. To do that, follow the steps written below:

On Windows 11

• Open the Start menu and click on the System Settings options. If you don’t find it, just search Settings in the search bar. It will show you the System Settings. 
• Then click on the “Windows Update” option.

• Next, click on the “Advanced Options” option.

• After that, click on the “Recovery” option.

• Then, you will see the “Advanced Startup” option with “Restart Now” button. 

• Click on the Restart button to restart the Windows under Advanced Startup.

On Windows 10

• Open the Start menu and click on the Settings options.

• Then click on the “Update and Security” option.

• Next, click on the “Recovery” option.

• Here, you will see the “Advanced Startup” option with “Restart Now” button.

• Now, click on the Restart Now button. It will restart the computer under Advanced Startup options.

Windows 7 (64-bit) and Windows Vista (64-bit)

• On Windows 7 and Vista, just restart the computer normally
• Then press F8 key on the startup screen. It will open the open the Advanced Startup options.

After restarting the computer under Advanced Startup options, the procedure in all versions of Windows is the same. Now it’s time to disable the digital driver signature enforcement. Follow the below steps to do it.

• On restarting the PC under Advanced Startup, you will see the options on the screen as shown in the image below.

• Now, click on the “Troubleshoot” option.

• Then, click on the “Advanced Option”.

• Next, click on the “Startup Settings”

• Now, click on the Restart options to restart the system to change Windows options that also includes driver signature enforcement. 

• After restarting the system, it will show you Startup Settings with lots of options. Now press 7 or F7 to disable Driver SIngature Enforcement as shown in the image below.

Done. You have successfully disabled the digital driver signature enforcement on your Windows.

Shortcut Key to Restart the Windows with Advanced Startup Option

If you don’t want to go through all those lengthy & time-consuming steps, you can use the shortcut key to restart the computer under the Advanced Startup option. 

Shift + Restart 

Just restart the computer normally while pressing the Shift key and it will do the job. Easy, simple, & time-saving, right?

Step 2: Install MT65xx USB VCOM Driver

After disabling the driver signature enforcement, you can install the MediaTek MT65xx USB VCOM driver on Windows without facing any issues. Here are the steps to install the driver:

• First of all, download VCOM Driver for Windows ZIP package using the download button given in the post.
• Then extract it using WinRAR or 7ZIP on your computer.
• Next, you will need to open the Device Manager. 
• Right-click on the My Computer or This PC, and then click on the Manage option. 

• It will open the Computer Management window. Here, you will find the Device Manager option at the left side. Click on it to open the device manager.

• In the device manager, you will see your computer name on the top of the list. Click on it. 

• Now, click on the Action option in the top menu bar and then, on the “Add Legacy Hardware” option.

• It will open a new Wizard window. Click on the Next option in that window. 

• Then select “Install the Hardware that I manually select from a list (Advanced)” option and click on the Next option.

• After that, select “Show All Devices” and click on the Next option. 

• Now click on the “Have Disk” option.

• Then browse to the Driver folder that you extracted in the second step. Then open the folder based on your Windows version and select the “usb2ser_Windows_X_Y_Bit.inf” file. (Here X is the Windows version and Y is the Bit version). For instance, I have Windows 10 64-Bit. So, I selected the “usb2ser_Windows_10_64_Bit.inf” file. Note: Windows 10 drivers will run perfectly fine on the Windows 11. So, select the same in case you have Windows 11.

• After selecting the file, click on the OK button.

• Then, it will a list of models. Select “MediaTek DA USB VCOM Port” or MediaTek PreLoader USB VCOM Port” and click on the Next button. (You can install both these files, but one at a time).

• Now, the Wizard will be ready to install the driver. Click on the Next button.

• After that, Windows Security Prompt will pop up. Just click on the “Install this driver software anyway” option.
• It will begin installing the driver on your computer and will take a few minutes. 
• Once completed, click on the Finish option.

Done. You have now successfully installed the MT65xx USB VCOM Driver on your Windows.

FAQ

Conclusion

MediaTek MT65xx USB VCOM Driver is a necessary driver that allows the computer to recognize the connected devices powered by the MediaTek MT65xx chipset. Without it, your computer will not recognize the device while flashing it. If you face such problems, then you will need to install MT65xx USB VCOM Driver or MT65xx Preloader, driver.

In this article, we have shared the MT65xx USB VCOM Driver’s latest version. We have also shared a complete installation guide for all versions of Windows along with their screenshots. Following the steps one by one, you can easily install the driver on your computer. We hope you found this guide helpful. If you have any questions, feel free to ask us in the comment section. Have a nice day!